3M™ 054007-08316 5300 Motor Lead Pigtail Splice Kit, 5 to 8 kV, 250 to 500 kcmil, 4/0 AWG to 500 kcmil Conductor, EPDM Rubber
3M™ Motor lead pigtail splicing kits 5300 series are a series of kits designed for splicing motor lead cables to incoming feeder cables, including pigtail (stub) connections at 1000 volts orless, as well as 5/8 kV non-shielded feeders. The splice is main component, the slip-on splice cover, is made from EPDM rubber. A mastic strip is used for the moisture seal. These kits are designed to be used with copper compression, one or two hole lugs. After being crimped onto the cables, the lugs are bolted together in a pigtail configuration, then insulated and sealed with the 3M™ Motor Lead Splicing Kit. Each kit contains the necessary materials (except lugs) needed to make three splices. The lugs must be purchased separately. 3M™ Scotchlok™ copper compression lugs 30000 series or other UL listed copper lugs, can be used.